[email protected]

150 Lbs. Weld Flanges - Matco-Norca

150 Lbs. Weld Flanges. Raised Face Blind Flanges. Slip On Flat Face Flanges. Lap Joint Flat Face Flanges. Slip On Raised Face Flanges. Socket Weld Raised Face Flanges (Standard / XH) Threaded Raised Face Flanges. Weld Neck Raised Face Flanges (Standard / XH) Size 2" - 12". 3 in. Slip-On 150# Carbon Steel Raised Face Flange 3 in. Slip-On 150# Carbon Steel Raised Face Flange (110030000) at Ferguson. Nobody expects more from us than we do. ®

ANSI / ASME B16.5 Raised Face Flange Class 150 Dimensions

The pressure rating of a raised flanges will determine the height of the raised face. The ASME B16.5 standard includes Raised Face Cast Iron Flanges with the following rating class designations i.e. class 150, 300, 400, 600, 900, 1500, and 2500 produced in a size range between NPS 1/2 through NPS 24, with their requirements given in both metric ANSI B16.5 Class 150 Slip On Flange Raised Face/Flat Face ANSI B16.5 Class 150 Slip On Flange Raised Face/Flat Face RF (in) Star Tubes and Aluminum 6061 T6 slip on Flange,RAISED FACE,Flat We are a professional Aluminum alloy flanges manufacturer,Aluminum 6061 T6 slip on FlangeRAISED FACE, #150 slip on raise face flange, DIN 2576 PN 10 slip on Flange/EN 1092-1 type 01 slip on FF Flange. ASME B16.5 150 lbs 6061 T6 slip on Flange, DIN EN1092-1 PN6 PN10,PN16 slip on flanges. DIN 2576 PN10 6061 T6 Flanges. DIN 2576 PN10 6061 T6 slip on FF Flanges. Standard size DN40DN50DN65DN80DN100DN125DN150DN200DN300. ALUMINUM 6061 T6 Flanges

Flange Faces - Raised Face (RF), Flat Face (FF), Ring-Type

In pressure classes 150 and 300, the height of raised face is approximately 1.6 mm (1/16 inch). In these two pressure classes, almost all suppliers of flanges, show in their catalog or brochure, the H and B dimensions including the raised face height. ( (Fig. 1)) Flange, Slip on, Class 150, ANSI B16.5 3D CAD Model Mar 08, 2016 · Raised Face & Flat Face Custom properties exist for Description & Size. iMate exists for typic Flange, Slip on, Class 150, ANSI B16.5 3D CAD Model Library GrabCAD Slip On Flange - Introduction and Specifications OctalsteelSlip On Flange. Common outer diameters:1/2 inch to 24 inch. Special customized diameters:up to 60. Material Types:Stainless Steel, Alloy Steel, Carbon Steel. Class range:Class 150 to 2500. PN 2.5 to PN 250. Flange face type:RF, RTJ. Octal offers slip on flange with materials standards in ASTM A105, ASTM A182, ASME B16.5, BS 3293, DIN 86029.

Slip-on flange:Flange Faces

ASME B31.1 says that when connecting flat face cast iron flanges to carbon steel flanges, the raised face on the carbon steel flange must be removed, and that a full face gasket is required. This is to keep the thin, bittle cast iron flange from being sprung into the gap caused by the raised face of the carbon steel flange. Stainless Steel Raised Face Slip On Flanges Stainless The raised face slip on flange has to be welded to the pipe. Stainless Steel Raised Face Slip on Flanges. Types:Raised Face Slip On. Sizes:1/2" - 36" +. Bores:S/5s - XXH. Pressures:150 - 300 - 600. Alloys:Stainless - Carbon - Aluminum.ANSI/ASME B16.5 Slip On Flange Dimensions (150lb-1500lb Class 150 lbs Notes -Weights are based on manufacturers data and are approximate. -Flat face flanges may be provided at full thickness, C, or with raised face removed (the latter is nonstandard). ANSI-ASME-B16-5-Slip-On-Flange-Dimensions-class300lb